Features Technical In tune with your inboard
Read more news

In tune with your inboard

Repowering an inboard boat can be an expensive undertaking, so be sure to consider all of the factors

The repowering of this 25-foot Farallon involved a total reconstruction of the boat from the cabin aft.Last month we looked at the challenges and benefits of repowering outboard-powered boats. This month, the spotlight shines on inboard and sterndrive repowering.

Careful consideration of your options and the tradeoffs you face will be critical to the success of your repowering project — or your decision not to repower. We tapped two repowering pros who offered advice that serves as a starting point for those thinking about upgrading their current diesel or gas engine, or jumping from gas to diesel or vice versa.

The first step: Decide whether you really need to repower. Your boat may be performing poorly because of a number of reasons not having to do with the engine(s), such as improper propeller diameter or pitch, a fouled bottom, a weight distribution issue, or a poorly tuned engine or other mechanical issue.

Another factor that continues to plague engines is contaminated fuel, particularly fuel with ethanol and the problem of phase separation. Your filtering systems must be maintained meticulously, and the fuel should be treated so it won’t deteriorate during prolonged periods of non-use, such as winter layup.

You must also determine whether the boat is worth the expense of a repower. Most boatyards recommend the owner have a survey conducted before going forward with the project. Boats constructed with cored laminates need special attention. A wet core material can compromise hull strength, and new, more powerful engines could damage the hull.

Pros

Among the most obvious benefits of new power is that a boat begins another life. The plusses of repowering include increased reliability, better speed and fuel economy, lower engine noise, and a reduction in smoke and fumes.

“There’s nothing worse than having an old boat that keeps breaking down,” says Alan Bramble, president of Tolchester Marina in Chestertown, Md., which has been repowering boats since 1971 (www.tolchestermarina.com). “But new engines can change everything.”

After Tolchester repowered a 36-foot 1973 Hatteras, the owner was so pleased with the increased performance that she hugged and kissed Bramble and the rest of his crew. Tolchester workers replaced the twin 210-hp Cummins diesels with a pair of 370-hp Cummins engines, increasing the boat’s top speed from 12 to 29 knots. “She said, ‘You’ve made boating fun again. This old boat can zip by the newer ones,’ ” says Bramble.

Another positive that comes with a new engine is the warranty. Bramble points out, however, that the warranty only becomes active if the engine manufacturer certifies the installation. “After it’s certified you know you’ve got an installation that you can count on, and your boating should be trouble-free,” he says. “And if a problem does occur, you can fall back on the warranty, and the parts will be more readily available than for older motors.”

Some manufacturers, such as Cummins MerCruiser Diesel, offer reconditioned engines that cost about a third less than new models, says Bramble. In the last four years, Tolchester has repowered about 50 boats with reconditioned power plants, he notes.

Cons

Switching from gas to diesel, or vice versa, obviously presents a host of issues to address, but upgrading within the same type of power presents its own considerations, says Soundings technical advisor Erik Klockars. Klockars, an independent technician who operates out of Niantic, Conn., juggled five repowering jobs this winter.

Windstone's new Cummins diesel was placed admidships.Case in point is the 39-foot express cruiser he is repowering. One of the twin 7.4-liter gas inboards (385 hp) needs to be replaced. But complete assemblies of the 7.4 are hard to find because it has been replaced by an 8.1-liter engine. That means the owner will be forced to run two different engines in the same boat, which is not ideal, especially if he wants to sell the boat, says Klockars.

With the engine placed amidships this changes the way the boat sits in the water when light on fuel.The older the engine, the more complicated the conversion. Older twin-screw inboard boats may be powered with a “right-hand” and a “left-hand” engine, says Klockars. Today’s engines almost all turn in the same direction — to the left. A transmission that changes the direction of the engine’s output solves the problem, but it’ll cost you. A loose transmission can cost anywhere from $2,000 to $7,000. The price gets considerably less, however, when the transmission is bought with the engine.

Space ranks high on the list of repower considerations. The dimensions of your new power plant need to be very close to that of its predecessor. The motor-mount width and the height required for the new engine may be different than for the previous unit.

There also are issues regarding the shaft and running gear. “You have to make sure the running gear is strong enough,” says Bramble. “The hardware needs to match the engine.”

Some owners want too much power. One of Bramble’s customers insisted on installing twin 625-hp Detroit diesels in his mid-1980s sportfishing boat, even after Bramble told him a pair of 435-hp engines would do the job. The boat reached 28 knots with the engines running at only 1,600 rpm. At full throttle (2,300 rpm), “The bow dug down, and the boat ran squirrely,” says Bramble.

Contact the boatbuilder to determine the appropriate power, or try to talk to other owners of your model boat who have repowered, he says.

When is it worth it?

The most important factor when contemplating a repower is expense. A bare-bones, single gas inboard repower (5.7-liter engine) will run from $9,000 to $10,000 installed. The aforementioned 39-foot express cruiser repower will probably cost the customer about $20,000 — and that’s for one engine, says Klockars. And the price tag would’ve been higher if switching engine brands was necessary, requiring the replacement of all the cables, harnesses, controls and instruments, he adds.

So when should you repower? “When you’re sure you are going to hold on to the boat for the long haul,” says Klockars. “Don’t take on such a time-consuming and expensive project if you’re going to sell the boat in two years. But if you love the boat and want to keep it, then go for it. Put the money into the project.”

One final piece of advice from Bramble: “Don’t repower to make a profit,” he says. “It’s just very hard to do. People don’t realize the expense and they get burned.”

 

See related articles:

- Volvo brings joystick control to its sterndrives

- John Deere's new king of the hill

 

This article originally appeared in the May 2009 issue.

 


BoatQuest

FOLLOW US
fbtwit yt