Home News

Throwback Bay skiffs include a modern touch

It used to be that in virtually every tributary of the Chesapeake Bay tidewater, a clutch of industrious men in a fleet of small skiffs worked the waters for hard crabs, clams, oysters and finfish, and scoured the shallow grass flats for soft crabs — changing out minimal gear for the catch in-season and taking the weather as it came.

The Crab Alley 1600 is a tradtional skiff that will not sink, burn or rot, says the builder.The boats were inexpensive and strong; the watermen were weathered and judicious in how they used the skiffs. Together they built the foundation of working the water in the Chesapeake.

Tom Jones of Crab Alley Custom Boats packages that Chesapeake tradition with a modern twist with two remarkably simplistic skiffs: the Crab Alley 1600 and 1800. Jones also recently expanded his lineup to include the CA 1900 RW (Rough Water).

Each has the look of a traditional, flat-bottomed wooden skiff, with raised bow and hard chine hull, but both were made from Synboard brand PVC material using glue-and-screw construction. Not a stick of wood was used in the assembly of the skiffs, Jones says.

“I think I’m the only person in the world building a ‘wooden boat’ out of PVC,” he says.

The result is a lightweight craft that Jones says exceeds U.S. Coast Guard flotation requirements and will not sink, burn or rot. Each boat is built expressly for its buyer with custom hull colors, matching seat cushions, and a properly sized and fuel-efficient outboard motor.

For Jones, building custom skiffs is a reminder of his youth. Even his shop is a reminder of the days of the watermen.

Tom Jones says he has never heard of anyone else combining tradtional wooden-boat techniques with PVC building materials.“I found this [abandoned] oyster house on a creek that feeds into Crab Alley Bay,” says Jones, 58, whose operation is near Kent Narrows on Maryland’s Eastern Shore. “This is a great spot to build the skiffs that we once played on in the river.”

Jones says the 18-footer — which he displayed, along with the 16-footer at October’s United States Powerboat Show in Annapolis — took about 600 hours to complete.

“[It] surveyed at a replacement cost of $46,000,” he says.

Cutting and shaping PVC stock is accomplished using mostly simple hand tools. The pieces are then glued together with an adhesive — Bond&Fill, specially formulated for use with PVC — and screwed into place while the adhesive is wet to ensure a strong, tight bond, he says.

Jones’ newest design, the CA 1900 RW, began in response to Professional BoatBuilder magazine’s Design Challenge. The contest charges builders with creating a trailerable boat — less than 2,700 pounds — with maximum 25 hp that burns less than 2 gallons per hour at a 15-knot cruising speed.

For his entry, Jones created a longer, wider version of his 1600, then added a keel to the original flat-bottom design. “I planked it to have a fish-belly shape,” he says. “The rounded forefront is designed to take 3- or 4-foot seas.”

The Crab Alley 1800 with custom paint, trailer and 20-hp Honda ES-ET is $19,990.The winner of the Design Challenge will be announced at The International BoatBuilders’ Exhibition & Conference, which takes place in October in Miami Beach.

Jones, who has rebuilt wooden boats since he was a boy, says he is meticulous in the fit and finish of his skiffs.

“When I am happy with [each boat], then I deliver,” says Jones, who used to run charter boats with his father and worked for 20 years as a journeyman carpenter in the Annapolis area. “It may take an extra three weeks after all the upgrades are worked in and painted, but that’s why I build one at a time by hand.”

The CA 1600, with a 15-hp Honda ES-ET, custom paint and trailer, is priced at $16,990. The CA 1800, with custom paint, trailer and 20-hp Honda ES-ET, is $19,990. The CA 1900 sells for $22,990.

For information on Crab Alley Custom Boats, visit www.craballeycustomboats.com or call (410) 643-3452.

 

This article originally appeared in the Mid-Atlantic Home Waters Section of the August 2009 issue.


FOLLOW US
fbtwit yt

Great Gear,
CLICK HERE